FEATURES
MULTIPLE
CONTROL MODES
On/Off, PID, Heat/Cool
10-Segment Ramp & Soak Profile
5 Programmable Ramp & Soak Profiles
Programmable Control Parameters
Manual Setpoint Entry & Program Hold
MULTIPLE
I/O CHOICES
Thermocouple, RTD & Thermistor Temp Inputs
Current, Voltage & Millivolt Process Inputs
Scaling for Voltage, Current & Millivolt Signals
Four Programmable Process Alarms (optional)
Relay or Solid State Outputs (optional)
Built-in Buzzer to Sound Alarm (optional)
Two Programmable Timers (optional)
HIGH
VISIBILITY DISPLAY
Large 7-Segment LED Display (0.8)
Ease of Viewing from Distance
Better Visibility than Typical Panel-Mount Units
Multiple Display Modes
Sealed Lockable Enclosure with Clear Plastic Front
Protection from Dust & Moisture
SPECIFICATIONS
INPUT
TYPE:
i) J,K,T,E,R,S,B, Thermistor, RTD
ii) Voltage
iii) 4-20milliamp loop current
iv) Milli-volt
CJC error: +/- 0.5 C (10C to 45c)
ACCURACY:
Resolution: 1C/F for T/C'S & rtds.
0.1C/0.2F for Thermistor
Voltage = 0.05% FS Current = 0.05% FS
A/D CONVERSION
20,000 count A/D converter
Conversion rate: 7/Second (typical)
DISPLAY
Red 7-segment LED display, 0.8" (20mm) Ht
Display test: 8.8.8.8.8.8.8. on power up
POWER OPTION
120Vac (60 Hz) - Standard 220Vac (50 Hz) - Optional
15VDC @ 900ma (Optional)
SCALE: Programmable from 1 - 30000
OFFSET:
0 - 20.00 (current input) 0 - 10.000 (voltage input),
0 - 100.00 (milli-volt input)
RATE: 0 - 500 Seconds
PROP. BAND: 0 - 100% of span
RESET: 0.00 TO 50.00 repeats/ minute
ON/OFF DEADBAND: Programmable: 0-Fullscale
CONTROL OUTPUT:
5VDC drive @50ma max (internal 5vdc source).
SCALE/OFFSET (for voltage, current & milli-volt):
Scale programmable from 1 - 30000
Offset : 0 - 20.00 (current), 0 - 10.000 (voltage ),
0 - 100.0 (milli-volt)
DECIMAL POINT: None, 10th, 100th,1000th
OUTPUT (optional):
1.Open collector - 4 open collector outputs, maximum sink capability of 50ma
per output
2.Relays: Single pole single throw, 1 Amp @ 28Vdc or 0.5 Amp @ 120Vac resistive
Output termination: Euro-style plugable connector
RATE: Variable -- Displayed as rate of change/Time Base.
DIMENSIONS:
Case: 7.55" W x 6.29" H x 4.05" D
Ingress Protection: up to IP65 (DIN standard)
|
||