FEATURES

• Displays temperature from Thermistors, RTD's and a wide range of Thermocouples
• Programmable display units -- Centigrade or Fahrenheit
• Totally front key programmable including input type
• Programmable time base for rate
• Auto/manual scanning with HOLD feature
• Two relays and one audio/visual output per channel (optional)
• Output status indication on front panel
• Programmable Channel display time
• Keeps track of process run time
• Built-in buzzer (with alarm option)
• Captures Min/Max readings
• Shows channel differentials (C1-C2, C2-C1)
• Security password for preventing unauthorized program changes

SPECIFICATIONS

ANALOG INPUTS:
i) J,K,T,E,R,S,B Thermocouples, Thermistor, RTD
Cold junction error: +/- 1 C (10C to 45c)
Open Sensor condition displayed
RESOLUTIOIN:
Temperature resolution: 1C/1F(Thermocouples)
Temperature resolution: 1C/1F(RTDs)
Temperature resolution: 0.1C/0.2F(Thermistors)
ANALOG TO DIGITAL CONVERSION
Dual Slope, integrating, 20,000 count A/D converter
Conversion rate: 7 conversions/sec (typical)
DISPLAY: Seven red 7-segment LED displays, 0.39 inch height.Negative polarity and Over-range indication.
DISPLAY TEST: 8.8.8.8.8.8.8. on power up
POWER OPTION
120VAC (60 Hz) (Standard) 220VAC (50 Hz) (Optional)
8VDC -- 15VDC @ 900ma (optional)
OUTPUT (optional)
1.Open collector - 4 open collector outputs, maximum
sink capability of 50ma per output
2.Relays: Single pole single throw, 1 Amp @ 28Vdc or
0.5 Amp @ 120Vac resistive
Output termination: Euro-style plugable connector