FEATURES

POWERFUL DISPLAY MODES

• Large 7-Segment LED Display (0.8’’)
  
• Process Readings in Engineering Units
  
• Programmable Eng Unit Labels - PSI, Ft, etc.
  
• Multiple Programmable Display Modes
  
• Frequently Used Math Functions
  
• Timer for Process Run Time
  
• Remote Display Hold

FULLY PROGRAMMABLE

• Fully Programmable Via Front Keys
  
• Scaling, Offset & Tare Functions
  
• Password for Security
  
• Program Settings Retained on Power Down

MULTIPLE I/O CHOICES

• Current, Voltage & Millivolt Process Inputs
  
• Scaling for Voltage, Current & Millivolt Signals
  
• Four Programmable Process Alarms (optional)
  
• Relay or Solid State Outputs (optional)
  
• Alarm Status Indication on Front Panel
  
• Built-in Buzzer to Sound Alarm (optional)
  
• Two Programmable Timers (optional)

SPECIFICATIONS

INPUT TYPE:
i) Loop Current: 4-20ma, 0-50ma
ii) Voltage: 0-5vdc, 0-10vdc
iii) Millivolt: 0-100millivolt
Other Inputs available: Consult Factory
ACCURACY:
Voltage = 0.05% FS Current = 0.05% FS
ANALOG TO DIGITAL CONVERSION:
20,000 count A/D converter
Dual slope integrating converter.
Conversion rate: Seven conversions/sec (typical)
DISPLAY:
Red 7-segment LED display, 0.8 inch height
Negative polarity and over-range indication.
Display test: 8.8.8.8.8.8.8. on power up
ELAPSED TIME:
Displayed in hours, minutes & seconds.
Display format: HH.MM.SS
POWER OPTION:
120VAC -- 60 Hz (Standard)
220VAC -- 50 HZ (Optional)
8VDC -- 12VDC @ 900ma (optional)
SCALE/OFFSET:
Scale programmable from 1 - 30000
Offset : 0 - 20.00 (current), 0 - 10.000 (voltage ),
0 - 100.0 (millivolt)
Decimal Point: 9999, 999.9, 99.99, 9.999
RELAY/OPEN COLLECTOR OUTPUT:
Relays: Single pole single throw, 1 amp @ 28vdc or 0.5 amp @120vac
Open Collector output: 50ma maximum (internal 5vdc source).
Outputs programmable as normally open , normally closed, latching or non latching.
RATE:
Displayed as rate of process change/minute.
DIMENSIONS:
Case: 7.55" W x 6.29" H x 4.05" D
Ingress Protection: Up to IP65 (DIN standard)